Solutions To Problem Concrete

Whether it’s moisture remediation, floor leveling, or coating removal and surface preparation, we will take the time to make sure that your floor is in optimal condition before applying polished concrete or any of our other concrete flooring options. We do this not only to prevent potential problems down the line, but also to make sure that the finished results are beautiful and of the highest quality.
Moisture Remediation

First Surface Solutions tests your concrete slab for moisture content and vapor emissions prior to the installation of any products. Moisture can result in adhesive failures, mold and mildew growth, and product delamination, curling or bubbling.
The universally recognized testing methods for moisture are ASTM F1869 for calcium chloride and ASTM F2170 for relative humidity. These tests measure the moisture emitted and contained within the concrete slab. The testing duration for these tests last between 60-72 hours and require the environment to remain at 75°F (± 10°F) with a relative humidity of 50% (± 10%) for 48 hours prior to and during the test.
Product and installation warranties require minimal moisture content, contamination, and emission levels to be maintained before, during, and after installation. If these conditions are not met, your warranty is voided, so we work hard to ensure moisture problems are identified and corrected early on.
The universally recognized testing methods for moisture are ASTM F1869 for calcium chloride and ASTM F2170 for relative humidity. These tests measure the moisture emitted and contained within the concrete slab. The testing duration for these tests last between 60-72 hours and require the environment to remain at 75°F (± 10°F) with a relative humidity of 50% (± 10%) for 48 hours prior to and during the test.
Product and installation warranties require minimal moisture content, contamination, and emission levels to be maintained before, during, and after installation. If these conditions are not met, your warranty is voided, so we work hard to ensure moisture problems are identified and corrected early on.
Floor Leveling
During concrete slab renovation projects, it’s not uncommon to find floors that are pitted, cracked, and out of level. In order to achieve a successful installation, we use the following solutions to create an even, leveled flooring surface:
- Self-leveling underlayments
- Anhydrous underlayments
- Cementitious overlays / polished overlays
- Provide a detailed survey at no cost to owner or contractor
- Identify floor flatness criteria
- Select and recommend product
- Provide a firm quote
- Survey the floor again to ensure all areas of concern are addressed
- Flatten the floor